Double Bladder with Retraction Bands

$509.96

Add to Cart:

  • Model: BC115
  • Shipping Weight: 10lbs
  • Manufactured by: OMS

Please Choose:




 

FIRST LINE OF DEFENSE BUOYANCY COMPENSATORS™               CE Approved  Approved

After 15 years the OMS® record for product safety and reliability continues to surpass all others. NASA , World Class Record holders, deep explorers and those who simply demand the best specify OMS® banded and non-banded BC’s. Three new, low drag, non-banded single bladder BC’s are introduced for 2006/2007; the redesigned Chemically Resistant BC, the Tesseract™, designed specifically for rebreathers, and the Larry Green™ designed for double cylinders. Like all OMS® BC’s these new models incorporate features such as (4) slots located in the non-inflated section of the BC. Cam bands can then be passed through the integral webbing on the back of the IQ™ pack, or through the cam-band slots on the Stainless Steel or Aluminum Back plates, inserted into these BC slots and finally placed over the single cylinder…. making any OMS® Backplate/Harness/BC system(s) very light and travel friendly. For those preferring super stability, the ever-popular Stainless Steel Single cylinder adapter (optional) can be used with either the IQ™ or the Stainless Steel/Aluminum Backplate Harness Systems.

FIRST LINE OF DEFENSE™: OMS® uses 1000 denier Cordura backed with 5.0 oz of Urethane to prevent abrasion and increase puncture resistance on all BC’s. Most competitors lose the First Line of Defense™ on their BC’s by using little r no urethane backing. This leaves their product vulnerable to punctures and abrasion . Housed inside our Cordura cover is a virgin urethane bladder (2 bladders on the dual bladder BC).


Elastomeric Retraction Band BC Features :

1. DUAL BLADDER: Inflator hoses and Dump valves are interchangeable for a variety of unique hose configurations. The dual bladder model features a total of four (4) pull dump valves located:
a.    Diver's Side bladder: lower left and top right
b.    Tank Side bladder: lower right and top left     (see figure at right)
c.    Colors: Black or Red

2. SINGLE BLADDER: The single bladder model has two (2) relief valves located: divers' right shoulder and divers' lower left. Inflator hoses and Dump valves are interchangeable   Colors: Black or Red   (45 lb. Black only)

3. POWER DEFLATION / ORAL INFLATION: The unique elastomeric bands (use is optional) assist in deflation, but still allow the diver to orally inflate the BC.

4. ELIMINATION OF AIR SHIFT: The OMS® elastomeric bands evenly compress the BC, eliminating the massive airshift associated with non-banded BCs that typically occurs when changing body plane.

5. LOW DRAG / LOW SNAG: The OMS® bands typically retract the BC to a width less than the diver's shoulders greatly reducing Drag and Snag potential.

6. TRIM ADJUSTABILITY: By adding or eliminating bands in different parts of the BC, the diver can adjust: a) lateral trim to compensate for stage bottles, cameras, etc. b) Horizontal trim e.g. head up, down or level.

elastomeric retraction band

dual bladder BC118
with Elastomeric Retraction Bands

BC115 - KBDual Bladder BC, 60 lb. lift in Black 
BC115 - KRDual Bladder BC, 60 lb. lift in Red 

Note: All stated BC lift capacities are +/- 2 lb.
Deflated


Your IP Address is: 38.103.63.55
Copyright © 2008 A1ScubaGear
Parse Time: 0.454 - Number of Queries: 547 - Query Time: 0.100272636581