The ZX/ Flathead-VI
Yoke and DIN connection with converter both shown
350-1110 (Yoke) 350-1121 (DIN with Yoke converter)

The ZX/ Flathead-VI

The ZX- Flathead VI is the Flagship of Zeagle's regulator line:

• The ZX-Flathead-VI's wide-open internal structure allows for direct and unrestricted airflow through the 1st stage, giving very low breathing resistance, even at great depths and high demands.
• It is very low in profile, barely extending above the tank valve, and places the low pressure hoses directly out to the sides, in a pattern preferred by many divers.
• Zeagle’s conical precision high-pressure valve provides much greater reliability and service life compared to conventional designs, while improving responsiveness and performance at all breathing rates.

Work of breathing at heavy* demand:
0.91 Joule/Liter
*198' (60M) depth, 750 psi inlet, 62.5 RMV (liters per minute respiratory volume)

• High Performance Porting
• Conical Precision HP valve
• Dry Environmental Seal with Hydro Transmitter
• Unrestricted airflow path
• Balanced Diaphragm
• Yoke or DIN inlet available
• 4 Low Pressure Ports (3/8”-24 UNF)
• 2 High Pressure Ports (7/16”-20 UNF)
• Weight 2.18 lb. (.99 kg.)
• Intermediate Pressure: 135-150 psi (9-10 bar)

ZX SECOND STAGE FEATURES:

• Downstream valve
• Balanced Diaphragm
• Dive/Pre Dive Venturi Control
• Diver Adjustable Breathing Sensitivity
• Anti-Freeze heat transfer device
• Weight: .54 lb. (.26 kg) ( w/o hose)
• Hose Length: 30 in. (.76 m)

Second Stage Materials:

Like all Zeagle regulators, The ZX/ Flathead-VI comes factory ready for use with EAN/ NITROX to 40% O2.

More Resources:

• A comparison chart showing all Zeagle regulators
• A printable PDF data sheet on the ZX/ Flathead-VI regulator.
• Breathing Performance Chart for the Flathead-VI.